On the base, ensure the configuration switch is set to “A” and the desk phone speaking volume and desk phone listening volume are both set to 3. note For most phones, these factory default settings will sound the best.ħ-3. While wearing your headset, press the call control button on headset.ħ-4. Remove the handset from desk phone cradle.ħ-5. If the dial tone sounds clear, press the call control button on headset and continue with Step 8 Making a Test Call with Desk Phone.ħ-6. If the dial tone is too loud or too soft, adjust the headset volume level.ħ-7. If the dial tone still does not sound clear, adjust the configuration switch until the dial tone sounds the best. NOTE : Multiple settings might work with your phone however, only one is the optimal position.ħ-8. Press the call control button on the headset and return the handset to the cradle to complete configuration. While wearing your headset, press the call control button on headset.Ĩ-2. Remove the handset from desk phone cradle.Ĩ-3. Dial the number using your desk phone.Ĩ-4. You can fine tune the listening volume on the headset. When wearing the headset on your right ear, push the volume button up to increase the volume and push the volume button down to decrease the volume. The opposite is true when wearing on left ear.Ĩ-5. To mute/unmute the call, press the volume button in. The desk phone talk button on the base will turn solid red when the headset is muted.Ĩ-6. If the listening volume is still too loud or too soft, adjust the desk phone listening volume on the base.Ĩ-7. If the speaking volume is too loud or too soft for your listener, adjust the desk phone speaking volume on the base.Ĩ-8. Press the call control button on the headset and return the handset to the cradle to complete the test call. Caution: Do not use headphones / headsets at high volumes for an extended period of time. Pairing Savi Base to Bluetooth Mobile Phoneĩ-1.See /healthandsafety for more information on headsets and hearing. Press and hold the Bluetooth pairing button on the Savi base for three seconds. The Bluetooth indicator light will alternately flash red and blue.ĩ-2. Place the Bluetooth mobile phone into discover mode. “SAVI” will appear on the phone when the phone finds the base.ĩ-3. If prompted by your mobile phone, type “0000” as the passcode.ĩ-4. The Bluetooth indicator light on the base will turn solid blue. Your Savi base is now paired with your Bluetooth mobile phone.ġ0-1. While wearing your headset, place a call with your mobile phone. The link to the headset will be brought up automatically.ġ0-2. Adjust the listening volume on the headset or on the mobile phone.ġ0-3.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |